-
Morgan
Posts
Steam Room Bench Slope OneEighth–OneQuarter Inch/Foot
Benches in steam rooms should always be sloped toward the drain to prevent standing water and mold growth. For a reliable thumb rule use a…
30–36″ Laundry Service Clearance Rules You Need
Allow at least thirty to thirty six inches of front clearance for laundry appliance servicing and maneuvering. For optimal access follow the laundry appliance access…
Tile Trim Fastener Spacing Six to Eight Inches
Secure tile trim depends on correct fastener spacing and proper attachment to keep edges stable during use. For stable trim installation fasten trim every six…
Buried LP Gas Pipe Depth Tape Tracer Guide
Keep underground liquefied petroleum gas piping at a depth that prevents damage from routine digging and surface loads. For house construction the practical thumb rule…
Basement Egress Six Foot Eight Rule Window Well Guide
Basement egress headroom must provide safe, unobstructed clearance along the entire escape route. For habitable basements we follow a thumb rule of maintaining a minimum…
Utility Trench Tree Setback Thumb Rule Guide
For safe placement of underground utilities near trees follow the utility trench tree setback thumb rule of house construction to prevent root interference and future…
Driveway Apron Throat Width: Curb Cut Turning Radius Guide
Match your driveway apron width to vehicle turning needs and local rules so entering and exiting the road is safe. Driveway apron width should start…
Exterior Tile OneQuarterPerFoot Slope Drain Guide
Exterior tile surfaces must shed water and stay safe, so follow the exterior tile slope drainage thumb rule: slope at least one quarter inch per…
Ten-Foot Propane Clearance Guide Valve Orientation
Propane tanks must be placed at safe measured distances from buildings and openings to prevent fire and vapor hazards. For a practical thumb rule, treat…